Español
Italiano
Deutsch
Polski
Français

Temperature out of range #10211 (SL1/SL1S)

Relevant for:

SL1 SL1S

Last updated 10 months ago

This article is also available in following languages:

What happened?

The printer is displaying the message: Reading of sensor not in range! Measured temperature: (temperature). Keep the printer out of direct sunlight at room temperature (18 - 32 °C).

Error name: Temperature out of range

Error code: #10211

Starting from firmware 1.7.0, this error replaces Temperature out of range #10208 (SL1/SL1S).

How to fix it?

To ensure smooth operation, the printer has a set working temperature between 18 - 32 °C (64 - 89 °F). Direct sunlight or a cold garage is not ideal. Try to move the printer to a more stable indoor environment, let the temperature equalize over 30 minutes to 1 hour, and try again.

If the error persists, it indicates an issue with a temperature sensor. Check if other errors might also occur, such as Temperature sensor failed #10210 (SL1/SL1S).

Was this article helpful?

Easy to understand

Solved my problem

Other reason

Comments

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.