ES
  • English
  • Čeština
  • Italiano
  • Deutsch
  • Polski
  • Français
Iniciar sesión

Embalaje de la XL Multicabezal para devolución - Material de embalaje original

Menu

Embalaje de la XL Multicabezal para devolución - Material de embalaje original

Embalaje de la XL Multicabezal para devolución - Material de embalaje original
Relevante para :
Ultima actualización 3 days ago
Embalaje de la XL Multicabezal para devolución - Material de embalaje original
 Dificultad
Muy fácil
 Pasos
35
 Idiomas disponibles
ENCSPLDEITFR
Introduction
Introduction
Introduction
This guide will outline how to prepare and pack down your Original Prusa XL for return or repair using the packing material we supply with assembled printers.
This guide is for the XL Multi-tool only. Single tool instructions are currently in preparation.
Contact our Customer support to receive the shipping label.
Be sure to read each step carefully! Colors on the Hexagon bullet points correspond to markers in the photos.
The package with the printer is heavy! Always ask another person for help with handling.
Tools necessary for this guide
Tools necessary for this guide
Tools necessary for this guide
Tools necessary for this guide
Para esta guía, prepara:
Llave Allen de 2.5mm
4mm Allen key
TX10 Torx key
Black packing tape
Wrapping tape
Fragile stickers (4x) Can be downloaded here.
Accessories for return shipment (you received with the printer)
Necessary fixations for this guide
Necessary fixations for this guide
Necessary fixations for this guide
For this manual, please prepare the complete original packaging material in which the Original Prusa XL printer was sent to you.
For this guide, please prepare:
Top front cardboard insert
Front inner insert
Cardboard insert
Top rear cardboard fixation
Continue to the next step...
Necessary fixations for this guide
Necessary fixations for this guide
Necessary fixations for this guide
Necessary fixations for this guide
Para esta guía, prepara:
Left and right bottom rear fixation
Left and right bottom front fixations
Left and right top rear fixations
Left and right top front fixations
Extruder boxes (two or five, depending on the amount of toolheads on your printer)
Preparing the printer
Preparing the printer
Preparing the printer
Preparing the printer
If you have loaded the filament, unload it from the hotend. On the screen, navigate to Filament -> Unload Filament.
Remove the filament from the hotend. It is necessary to completely remove it from the printer.
Move the Z-axis down. On the screen, navigate to Control -> Move axis -> Move Z.
Enfría la impresora. Ve a Precalentar -> ENFRIAR.
Wait until the hot parts are cooled down to ambient temperature. It takes approximately 10 minutes.
Versiones del soporte de la antena Wi-fi
Versiones del soporte de la antena Wi-fi
Versiones del soporte de la antena Wi-fi
Versiones del soporte de la antena Wi-fi
The Original Prusa XL might be shipped with one of the two versions of the Wi-Fi antenna. Both work the same.
Version A: Wi-Fi antenna holder is on the side, go to the next step.
Version B: Wi-fi antenna is in the middle. Please skip to Step 10.
Version A: Removing the Wi-Fi antenna
Version A: Removing the Wi-Fi antenna
Version A: Removing the Wi-Fi antenna
Make sure the printer is cooled down.
Turn the printer OFF and unplug the power cord.
Turn the printer with its back to you.
Unscrew and remove the Wi-Fi antenna from the printer.
Place the antenna and spool holder into the bag with other accessories.
Version B: Removing the Wi-Fi antenna
Version B: Removing the Wi-Fi antenna
Version B: Removing the Wi-Fi antenna
Version B: Removing the Wi-Fi antenna
Make sure the printer is cooled down.
Turn the printer OFF and unplug the power cord.
Turn the printer with its back to you.
Unscrew and remove the Wi-Fi antenna from the printer.
Place the antenna and spool holder into the bag with other accessories.
Loosen the four screws with a T10 key. There is no need to remove the screw completely.
Slide the XL-buddy-box-cover up and remove it.
Version B: Removing the Wi-Fi antenna
Version B: Removing the Wi-Fi antenna
Version B: Removing the Wi-Fi antenna
Version B: Removing the Wi-Fi antenna
Disconnect the antenna connector from the XL buddy board.
Loosen the two screws on the cover lightly, there is no need to remove them completely. Slide antenna holder to the right and remove it from the printer.
Gently pull out the antenna holder with the cable from the opening in the rear-cable-management-upper. Add the antenna holder to the accessories bag.
Add the antenna holder to the accessories bag.
Disconnecting the Nextruder cables (Dual-head)
Disconnecting the Nextruder cables (Dual-head)
Disconnecting the Nextruder cables (Dual-head)
Disconnecting the Nextruder cables (Dual-head)
This step is intended for Dual-head. If you have the Five-head version, skip to the next step.
Afloja dos tornillos de la tapa ligeramente. No es necesario retirarlos completamente. Empuja la cubierta hacia la derecha y retírala de la impresora.
The cover might not be present depending on your printer variant.
Remove the Nextruder connectors from both of the slots. Make sure to press the safety latch so to release the connectors.
Fija la cubierta de los conectores a los tornillos. Empújala hacia la derecha y aprieta los tornillos.
Disconnecting the Nextruder cables (Five-head)
Disconnecting the Nextruder cables (Five-head)
Disconnecting the Nextruder cables (Five-head)
Disconnecting the Nextruder cables (Five-head)
This step is intended for Five-head. If you have the Dual-head version, skip to the next step.
Afloja cuatro tornillos de la tapa ligeramente. No es necesario retirarlos completamente. Empuja la cubierta hacia la derecha y retírala de la impresora.
Disconnect the three Nextruder connectors from the slots. Make sure to press the safety latch so to release the connectors.
Disconnecting the PTFE tube
Disconnecting the PTFE tube
Disconnecting the PTFE tube
There are two or five PTFE tubes on the side filament sensors depending on number of tool heads on your printer. The process is the same for both of them.
Empuja el collar negro para liberar el tubo de PTFE.
Gently pull out the PTFE tube.
Removing Nextruder docks
Removing Nextruder docks
Removing Nextruder docks
Remove each Nextruder by pulling it outwards from the metal inserts.
Although a small resistance is expected, as the metal inserts are magnetic, use moderate force.
Removing the nozzle seals
Removing the nozzle seals
Each of the nozzle docks have a nozzle seal that needs to be removed before removing the nozzle dock. Do that for all the toolheads on the printer.
Place the nozzle seal together with the other accessories.
Removing Nextruder docks
Removing Nextruder docks
Removing Nextruder docks
Push the 2.5 mm Allen key all the way through the hole in the rear metal sheet until you reach the middle screw in the xl-dock-cable-router and loosen the screw until the dock is loose.
Carefully pull up the Nextruder dock and cable from the printer.
Packing the extruder
Packing the extruder
Packing the extruder
Packing the extruder
Using the T10 key, loosen the screws marked on the picture, there is no need to remove them. Slide down the flexible plate of the cable bundle and remove it.
Press down the blue collet to remove the PTFE tube.
If the PTFE is too slippery, try grabbing it with a piece of paper.
Press the latch to detach the cable connector.
Packing the extruder
Packing the extruder
Packing the extruder
The extruder and dock will be separated.
Pack the extruder, dock, cables and PTFE carefully into the propper places in the foam.
Close the box, and put the extruder packaging aside for now, we'll use it later.
Disassembling the LCD
Disassembling the LCD
Disassembling the LCD
Use the 2,5mm Allen key to unscrew both M3x18 screws from the LCD supports.
Gently unplug the LCD cable.
Disassembling the LCD
Disassembling the LCD
Disassembling the LCD
Disassembling the LCD
Use the TX10 key to release the screw securing the PE cable.
Let the cables hang freely.
Pack the LCD into the bubble wrap to prevent damage while shipping.
Preparing the bottom
Preparing the bottom
Preparing the bottom
Preparing the bottom
The bottom part of the box has 4 pre-cut holes for shipping straps.
Use your finger to create holes in the cardboard.
Preparing the bottom
Preparing the bottom
Preparing the bottom
Preparing the bottom
Do not twist the shipping straps.
Take the shipping straps.
Stretch the shipping strap between two holes as described in the picture.
Move the shipping strap to be the same length on both sides.
Stretch the shipping strap on the second side of the bottom part box.
Preparing the bottom
Preparing the bottom
Preparing the bottom
Insert the cardboard base into the bottom part of the box.
The front of the box shows cardboard cuts on the sides.
Put the fixation into the cardboard base as described in the picture.
Inserting the printer
Inserting the printer
Do not hold the printer by the top metal profiles!!! Otherwise, you may warp the printer and damage the LED lighting inside the profiles.
Handle the printer in two people.
Use the side handles on both sides of the printer to handle.
Insert the printer into the cardboard base.
Be careful to orient the printer correctly to the front of the box base.
Keep the steel sheet on the printer. No need to pack it separately.
Installing the fixations
Installing the fixations
Installing the fixations
Installing the fixations
Bend the flaps of the main box, and attach the front inner insert on them on the side shown in the image.
Secure the front inner insert by inserting the cutouts into the bottom box. See the picture
Lift the top part of the front inner insert so the CoreXY holds it up.
Place the previously prepared Nextruder boxes on the sides of the printer.
Si tienes una XL con 2 cabezales, ve al siguiente paso. Si tienes una XL con 5 cabezales, ve al paso 27.
Installing the fixations (Dual-head)
Installing the fixations (Dual-head)
Installing the fixations (Dual-head)
Fold the cardboard insert and add it between the extruder boxes.
Fold the tabs from the front inner insert to hold down the cardboard insert.
Preparando el superior
Preparando el superior
Preparando el superior
Preparando el superior
Use a knife to cut the tape and open the box.
Put the top part on the prepared base
Open the top of the box to place the rest of the fixations.
The next steps are the same for the 2 toolhead and 5 toolhead printers, even if only one of them appears in the images.
Instalando las fijaciones superiores
Instalando las fijaciones superiores
Instalando las fijaciones superiores
Insert the left and right top front fixations.
Place the Top front cardboard fixation between the foam parts.
Use the space in the Top front cardboard fixation to store accessories that you have received with the printer.
Instalando las fijaciones superiores
Instalando las fijaciones superiores
Instalando las fijaciones superiores
Instalando las fijaciones superiores
Place the top rear fixations.
Put the top rear cardboard fixation between the box and the white fixture.
Turn the cardboard cutout around the X-carriage to fix it in position.
Add the aligners on the sides of the box.
Preparing the shipping straps
Preparing the shipping straps
Preparing the shipping straps
The shipping strap must be flattened, not twisted.
Push the strap through the prepared hole in the top part box.
Do this step for all straps on both sides.
Wraping the package
Wraping the package
Wraping the package
Use wrapping tape to tape all places as described in the pictures.
Make at least a minimum of 3 lines of wrapping tape on yellow spots.
Cover the shipping straps with wrapping tape.
Use packing tape or food wrap (transparent) for wrapping the whole package. You'll protect your package from unnecessary damage.
Labelling the package
Labelling the package
Labelling the package
Place the "Fragile" stickers at least on four sides of the box. Do not place them on the top or bottom side.
You get the shipping label from our Customer support.
Place the shipping label on the side with the fragile sticker.
¿Fue útil esta guía?

Comentarios

¿Todavía tienes preguntas?

¿Todavía tienes preguntas?

Si tienes alguna pregunta sobre algo que no se ha tratado aquí, comprueba nuestros recursos adicionales.
Y si eso no lo soluciona, puedes enviar una petición a [email protected] o mediante el botón que hay más abajo.

Contacta con nosotros