English
1. Introduction
Step 1 of 75 (Chapter 18 of 18)
Contents
Comments
⬢This guide will take you through the installation of the White LED strip on the Original Prusa Enclosure.
The supplied fasteners include extra spare parts.
Contents
Original Prusa Enclosure assembly (external display mounting) (v1.03)
- 1. Introduction
- 2A. Preparing the printer (MK4/S & 3.9/S)
- 2B. Preparing the printer (MK3S+ Black PSU)
- 2C. Preparing the printer (MK3S+ Silver PSU)
- 3. Assembling the enclosure
- 4A. Installing the printer (MK4/S & 3.9/S)
- 4B. Installing the printer (MK3S+ Black PSU)
- 4C. Installing the printer (MK3S+ Silver PSU)
- Manual changelog Enclosure kit
- 5. Fire Suppression System (add-on)
- 6. Hinged Lid (add-on)
- 6A. Hinged Lid with MMU3
- 6B. Hinged lid with MMU2S
- 7. Advanced filtration system (add-on)
- 8. Mechanical lock (add-on)
- 9. Quick release PSU cable - MK3S+ Black PSU (add-on)
- 10. Quick release PSU cable - MK4/3.9 Black PSU (add-on)
- 11. White LED strip (add-on)
- Introduction
- Different external PSU
- Introduction - External PSU Delta
- Tools necessary for this chapter
- Mounting the external PSU (optional): parts preparation
- Mounting the external PSU (optional)
- Assembling the external PSU bracket (optional)
- Preparing the printer
- Guiding the external PSU cable
- Guiding the external PSU cable
- Guiding the external PSU cable
- Mounting the external PSU (optional)
- Installing the PSU
- Guiding the external PSU cable
- Guiding the external PSU cable
- Assembling the LED strip: parts preparation
- Assembling the LED strip
- Assembling the LED strip
- Mounting the LED strip
- Connecting the LED strip: parts preparation
- Guiding the cables
- Connecting the LED cable
- Installing the basic board: parts preparation
- Installing the basic board
- Installing the basic board
- Connecting the LED cable
- Mounting the basic board
- Connecting the external PSU
- Connecting the Power cord: parts preparation
- Connecting the Power cord
- That's all!
- Introduction - External PSU XP Power
- Tools necessary for this chapter
- Suggestion
- Mounting the external PSU (optional): parts preparation
- Mounting the external PSU (optional)
- Assembling the external PSU bracket (optional)
- Removing the LCD
- Removing the printer
- Preparing the printer
- Preparing the printer
- Removing the printer
- Loosening the bottom panel
- Mounting the external PSU
- Guiding the external PSU cable
- Guiding the external PSU cable
- Tightening the bottom panel
- Loosening the bottom panel
- Guiding the external PSU cable
- Guiding the external PSU cable
- Guiding the external PSU cable
- Tightening the bottom panel
- Inserting the printer
- Installing the PSU
- Guiding the external PSU cable: parts preparation
- Guiding the external PSU cable
- Assembling the LED strip: parts preparation
- Assembling the LED strip
- Assembling the LED strip
- Mounting the LED strip
- Connecting the LED strip: parts preparation
- Connecting the LED cable
- Mounting the LCD: parts preparation
- Mounting the LCD
- Securing the LCD cable
- Installing the basic board: parts preparation
- Installing the basic board
- Installing the basic board
- Connecting the LED cable
- Mounting the basic board
- Connecting the external PSU
- Connecting the PTFE tube
- Connecting the Power cord: parts preparation
- Connecting the Power cord
- That's all!
Comments
Log in to post a comment
JohnnySombrero
•
If you've already installed the external power supply for the filtration unit, skip to step 16.
naven12
•
Nah, it only takes about 30 minutes, and was not hard at all. Much more convenient for it to be mounted on the enclosure.
jalsop
•
A suggestion: if possible, just mount the power supply on your benchtop or elsewhere, and run the cable to the control unit on the front of the printer. That will save you many steps inclduing removing the existing pwer supply and the front and rear enclosure feet.