• Čeština
  • Español
  • Italiano
  • Deutsch
  • Polski
  • Français
  • 日本語

Preheat the nozzle!

Last updated 4 years ago
This article is also available in following languages: 

The error message Preheat the nozzle! occurs when you are loading new filament and the nozzle did not reach the needed temperature to do so.

The minimum temperature for loading a new filament is 190°C. However, it is recommended to select the actual recommended printing temperature of the material you want to load in. 


  1. Make sure the nozzle is preheated. The indication of the current temperature is visible on the main LCD screen.
  2. You can preheat the nozzle in LCD Menu - Preheat - select material or it can be done manually through LCD Menu - Settings - Temperatures.
  3. Wait until the required temperature is met, then you can put the new filament inside the extruder opening.
  4. After that, you can load the filament through LCD Menu - Load filament
Was this article helpful?


Still have questions?

Still have questions?

If you have a question about something that isn't covered here, check out our additional resources.
And if that doesn't do the trick, you can send an inquiry to [email protected] or through the button below.

Contact us